# Weird hardware pattern problem

**URL:** <https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37>\
**Category:** Uncategorized\
**Created:** [December 20, 2020, 7:34am UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37 "2020-12-20T07:34:19Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![arahasya](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@arahasya](https://rpi-rgb-led-matrix.discourse.group/u/arahasya)\
**Post date:** [December 20, 2020, 7:34am UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37/1 "2020-12-20T07:34:19Z")

</div>

Hello everyone

I have manufactured 16 x 48 1:4 scan panels and made display of 432 x 128

I am visually expereincing a weird problem. I can see vertical lines after 8th column on some panels. The weird thing is some panels are absolutely uniform. Only a few panels have random un - uniform brightness. And some panels have vertical lines of 1 x 16 which is my main problem.

Now this doesn’t look like a software issue because attaching that panel anywhere on the matrix shows the same pattern.

What I have tried to do :- Change driver IC’s, MOSFET, Buffer IC’s to check if it is a issue with my lot. But doesn’t seem so. Using IC’s from a perfect panel still gives the same result on a problematic panel. So I am not able to understand this hardware problem. The upper half 8 x 48 and lower 8 x 48 is completely unrelated so I am not able to understand how to vertical lines are being seen for the whole 1 x 16 coloumn. And I am seeing this after every 8th row. So there are 6 such vertical lines in some panels of 16 x 48.

Anybody has any idea what is going wrong and what I should check?

 ![WhatsApp Image 2020-12-20 at 12.46.26](https://global.discourse-cdn.com/free1/uploads/rpi_rgb_led_matrix/original/1X/c589adbf3210a8638ed657c3161fda0fb84aa5d2.jpeg)  
 ![WhatsApp Image 2020-12-20 at 12.38.05 (1)](https://global.discourse-cdn.com/free1/uploads/rpi_rgb_led_matrix/original/1X/10ccd9befafde52366da731e86f4493139a3ed75.jpeg) ![WhatsApp Image 2020-12-20 at 12.38.05](https://global.discourse-cdn.com/free1/uploads/rpi_rgb_led_matrix/original/1X/70ea5765b125848e98c11dd65a3e9cfff2e9f1b7.jpeg)

 ![WhatsApp Image 2020-12-20 at 12.51.57](https://global.discourse-cdn.com/free1/uploads/rpi_rgb_led_matrix/original/1X/1c6843ddb4c241e16fb1454d0a64e1eea1c0cf6c.jpeg)

---

<div class="post-metadata">

**Author:** ![marcmerlin](https://yyz2.discourse-cdn.com/free1/user_avatar/rpi-rgb-led-matrix.discourse.group/marcmerlin/32/40_2.png) [@marcmerlin](https://rpi-rgb-led-matrix.discourse.group/u/marcmerlin)\
**Post date:** [December 21, 2020, 2:37pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37/2 "2020-12-21T14:37:40Z")

</div>

Cool setup.  
You didn’t show what command line arguments you gave to rpi-rgb-panel.  
Is this a single chain? (if so, your refresh rate must be terrible for so many pixels).  
Did you make 3 different chains? How is this wired in the back?  
What rPi are you using?

---

<div class="post-metadata">

**Author:** ![arahasya](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@arahasya](https://rpi-rgb-led-matrix.discourse.group/u/arahasya)\
**Post date:** [December 21, 2020, 3:40pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37/3 "2020-12-21T15:40:41Z")

</div>

Thanks.

I have divided the display into 2-parts and using 2 raspberry pi CM3+ custom PCB

432 x 64 for one pi. 4 parallel chains.  
I am keeping pwm bits to 1-2 so refresh rate is not a problem. I think after doing more tests we have eliminated various possible issues and boiled down to PCB manufacturing issue. Though it is hard to believe such variations from JLCPCB. But I have done every possible hardware and software test.

The 8th column remains dim no matter what ( Only for a few PCB’s). Even If I inter change the driver output with a bright one.

---

<div class="post-metadata">

**Author:** ![marcmerlin](https://yyz2.discourse-cdn.com/free1/user_avatar/rpi-rgb-led-matrix.discourse.group/marcmerlin/32/40_2.png) [@marcmerlin](https://rpi-rgb-led-matrix.discourse.group/u/marcmerlin)\
**Post date:** [December 24, 2020, 2:30pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37/4 "2020-12-24T14:30:58Z")

</div>

What software/hardware are you using? this lib does not support 4 parallel chains.  
Are you using this lib?  
if so, what command are you running in examples/demo to light up all the panels with 4 chains (which isn’t supported, so I’m confused)

---

<div class="post-metadata">

**Author:** ![arahasya](https://avatars.discourse-cdn.com/v4/letter/a/8baadc/32.png) [@arahasya](https://rpi-rgb-led-matrix.discourse.group/u/arahasya)\
**Post date:** [December 24, 2020, 3:08pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37/5 "2020-12-24T15:08:48Z")

</div>

I have already added support for Henner’s library for 6 parallel chains with Compute Module 3+.

---

<div class="post-metadata">

**Author:** ![marcmerlin](https://yyz2.discourse-cdn.com/free1/user_avatar/rpi-rgb-led-matrix.discourse.group/marcmerlin/32/40_2.png) [@marcmerlin](https://rpi-rgb-led-matrix.discourse.group/u/marcmerlin)\
**Post date:** [December 24, 2020, 3:33pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/weird-hardware-pattern-problem/37/6 "2020-12-24T15:33:07Z")

</div>

Please link to your hardware solution and software you’re using.  
Is anyone else using your improved solution?  
It’s a bit hard for the rest of us to relate if we don’t have your hardware and software :-/
