# Rpi0 2w speed compared to rpi3a

**URL:** <https://rpi-rgb-led-matrix.discourse.group/t/rpi0-2w-speed-compared-to-rpi3a/913>\
**Category:** Uncategorized\
**Created:** [November 14, 2024, 11:55pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/rpi0-2w-speed-compared-to-rpi3a/913 "2024-11-14T23:55:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![marcmerlin](https://yyz2.discourse-cdn.com/free1/user_avatar/rpi-rgb-led-matrix.discourse.group/marcmerlin/32/40_2.png) [@marcmerlin](https://rpi-rgb-led-matrix.discourse.group/u/marcmerlin)\
**Post date:** [November 14, 2024, 11:55pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/rpi0-2w-speed-compared-to-rpi3a/913/1 "2024-11-14T23:55:29Z")

</div>

As we know, the original rpi0 is very slow and not the best use for this library, especially if you want multiple channels.  
However, I got an rpi0 2l, the new version, and confirmed after testing that it is as fast, if not a little faster as the rpi3 in my own tests.

I did 2 tests using 3 channels and a bigger array

## Test 1: 192x288

```auto

```

- 245Mhz new dietpi rpi0 2w (faster)
- 220Mhz very old raspbian (stretch) on rPi3a
- 220Mhz rpi-rgb-led-matrix.MyOld2020VmapperZBranch on rPi3a  
with --led-slowdown-gpio=0 up to 320Mhz but display is garbled
- 300Mhz on rPi4 old raspbian, but display broken
- 120Mhz on rPi4 with --led-slowdown-gpio=2, display slightly broken
- 220Mhz on rPi4 with --led-slowdown-gpio=3

=\> verdict: rpi02w is faster than Pi3 and about same as Pi4

## Test2: 512x192

```auto
~/rpi-rgb-led-matrix/examples-api-use/demo --led-gpio-mapping=regular --led-rows=64 --led-cols=128 --led-row-addr-type=0 --led-chain=4 --led-show-refresh --led-slowdown-gpio=1 --led-parallel=3 --led-pwm-dither-bits=1 --led-pwm-lsb-nanoseconds=50 --led-pwm-bits=7 --led-panel-type=FM6126A -D10

```

- 120-130Hz on rPi3
- 120-130Hz on rPi0 2w
- 270Mhz on Pi4 but display is wrong (too fast)
- 120=130 on Pi4 with -led-slowdown-gpio=3

=\> verdict: all 3 are the same

 ![image](https://global.discourse-cdn.com/free1/uploads/rpi_rgb_led_matrix/original/1X/5901270f2f5f7baa86ab83f21812d06c70c95f59.jpeg)

---

<div class="post-metadata">

**Author:** ![marcmerlin](https://yyz2.discourse-cdn.com/free1/user_avatar/rpi-rgb-led-matrix.discourse.group/marcmerlin/32/40_2.png) [@marcmerlin](https://rpi-rgb-led-matrix.discourse.group/u/marcmerlin)\
**Post date:** [November 15, 2024, 1:03am UTC](https://rpi-rgb-led-matrix.discourse.group/t/rpi0-2w-speed-compared-to-rpi3a/913/2 "2024-11-15T01:03:19Z")

</div>

While I’m at it, both boards work fine with P1.875 flex panels I just bought, although they need ABC decoding and they do not have output ports, so you can only run 3 of them with a single rPi

 ![image](https://global.discourse-cdn.com/free1/uploads/rpi_rgb_led_matrix/original/1X/e4591bc17f7cd0b3ca70cbb0c4b17d9ac38e24ec.jpeg)
