# Display quality degrades after 3 min

**URL:** <https://rpi-rgb-led-matrix.discourse.group/t/display-quality-degrades-after-3-min/550>\
**Category:** Uncategorized\
**Created:** [July 22, 2022, 1:33am UTC](https://rpi-rgb-led-matrix.discourse.group/t/display-quality-degrades-after-3-min/550 "2022-07-22T01:33:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Swanmw](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@Swanmw](https://rpi-rgb-led-matrix.discourse.group/u/Swanmw)\
**Post date:** [July 22, 2022, 1:33am UTC](https://rpi-rgb-led-matrix.discourse.group/t/display-quality-degrades-after-3-min/550/1 "2022-07-22T01:33:25Z")

</div>

I am running the mlb-led-scoreboard project on a 64x32 matrix using rgi-led-matrix. I’m using a pi 3b with the Adafruit hat and when I run the program it looks great for about one minute then the lines flicker and slowly the image degrades. I have tried all the gpio slow downs (1-4) with no success. I am hoping someone with more experience can help as I am fairly new to the world. Thanks

---

<div class="post-metadata">

**Author:** ![ccoenen](https://avatars.discourse-cdn.com/v4/letter/c/74df32/32.png) [@ccoenen](https://rpi-rgb-led-matrix.discourse.group/u/ccoenen)\
**Post date:** [July 23, 2022, 6:31pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/display-quality-degrades-after-3-min/550/2 "2022-07-23T18:31:34Z")

</div>

Does anything get hot? Maybe your power supply is not up to the task and overheats or something like that?

---

<div class="post-metadata">

**Author:** ![Swanmw](https://avatars.discourse-cdn.com/v4/letter/s/65b543/32.png) [@Swanmw](https://rpi-rgb-led-matrix.discourse.group/u/Swanmw)\
**Post date:** [July 23, 2022, 8:49pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/display-quality-degrades-after-3-min/550/3 "2022-07-23T20:49:56Z")

</div>

No, nothing is hot. I had the idea about the power source so I gave the led matrix a direct power supply and ran the pi off its own power supply too. Still had the same issue.

---

<div class="post-metadata">

**Author:** ![Rody](https://yyz2.discourse-cdn.com/free1/user_avatar/rpi-rgb-led-matrix.discourse.group/rody/32/245_2.png) [@Rody](https://rpi-rgb-led-matrix.discourse.group/u/Rody)\
**Post date:** [July 29, 2022, 5:04pm UTC](https://rpi-rgb-led-matrix.discourse.group/t/display-quality-degrades-after-3-min/550/4 "2022-07-29T17:04:28Z")

</div>

Good, I have already prepared LED with 12 matrix 64\*32.  
Command for an array:  
`sudo ./demo -D 1 --led-no-hardware-pulse --led-chain=1 --led-rows=32 --led-cols=64 runtext.ppm --led-parallel=1`  
It worked very well for me, but I did not make the connections manually without any adapter. A few days ago I bought RGB LED Matrix Panel Drive Board For Raspberry Pi, if you buy that is the best option I already read somewhere that the one from Adafruit has to have faults, although I don’t remember where.  
I leave my next comment for later because I am very busy. Excuse me also because my English is basic.  
**My recommendatio** n that you do the tests by connecting directly as it is in the repository.
