# Any Pi 5 testers out there?
**URL:** https://rpi-rgb-led-matrix.discourse.group/t/any-pi-5-testers-out-there/1214
**Category:** Uncategorized
**Created:** [April 11, 2026, 12:14am UTC](https://rpi-rgb-led-matrix.discourse.group/t/any-pi-5-testers-out-there/1214 "2026-04-11T00:14:32Z")
**Posts on this page:** 1
**Page:** 1
### Author:  [@kingdo9](https://rpi-rgb-led-matrix.discourse.group/u/kingdo9)
#### Post date: [April 11, 2026, 12:14am UTC](https://rpi-rgb-led-matrix.discourse.group/t/any-pi-5-testers-out-there/1214/1 "2026-04-11T00:14:32Z")
Just looking to get your experiences with the below code test to the hzeller library.
Raspberry Pi 5 Support.
Make sure you clone the pi5\_support branch
git clone --branch pi5\_support [https://github.com/kingdo9/rpi-rgb-led-matrix\_pwm\_experiment.git](https://github.com/kingdo9/rpi-rgb-led-matrix_pwm_experiment.git)
Discussion and how to run here.
>
>
> I recently got a Pi5 and was hoping to set up these panels I have, but don't see…m to be getting any LEDs to light up whatsoever.
>
> I'm trying with a single 64x64 1/32 panel with a ICN2037BP chipset, connected directly via jumper cables. (\[This Panel\](https://www.aliexpress.us/item/4000365937036.html)).
>
> \- I've hooked up the E pin
> \- I've tried \`led-slowdown-gipio=4\`
>
> I've powered the panel ok with a Pico so the Panel is fine (but had slow perf so now im here)
>
> From what I’ve read in the issues here, it should be working pretty smoothly. So I am starting to think its something with the Pi5? Happy to give more info here, just not sure what would be helpful